Electronic control fuel injection system (Common rail type) 1E-319 DTC: P0335 (Flash code 15) Crank sensor fault (no signal) Engine control module (ECM) Common rail pressure sensor signal G sensor signal 5V CKP HIGH signal CKP LOW signal 98 E-56 101 E-56 82 E-56 100 E-56 90 E-56 87 E-56 108 E-56 107 E-56 106 E-56 5 H-20 H-20 H-20 H-20 H-20 14 6 13 12 3 H-20 H-20 H-20 2 1 0.75 L 0.75 B 0.5 Br 0.5 L/W 0.5 R 0.5 G 0.5 L 0.5 L/W 0.75 B/W 0.5 L 0.5 Br 2 E-98 1 E-98 CKP sensor 1 E-112 2 E-112 3 E-112 1 E-113 3 E-113 2 E-113 Common rail pressure sensor G sensor TSWG0070 Description of circuit DTC P0335, P0336, P0340, P0341, or P1345 is not detected.
Engine under operation The crankshaft position (CKP) sensor detects the engine speed. When the sensing hole installed in the flywheel passes the tip of the CKP sensor, a voltage is generated and turned into a pulse signal. The engine control module (ECM) reads this pulse signal, and obtains the engine speed and injection timing based on the signal. DTC set condition G sensor signal exists but no crank signal. Action taken when DTC is set Main trouble symptom Trouble is displayed on the monitor of the machine or diagnosis lamp comes on.
Output lowering White smoke emitted Intense engine vibration possible Engine stall possible (restart is possible when G sensor is normal.) Back-up mode Control based on G sensor when it is normal Preconditions when DTC is set Cam pulse is normal.