Electronic control fuel injection system (Common rail type) 1E-33 Snapshot: Allows to record and display the data of malfunctions occurred. The displayed data not only includes the one corresponding to the moment when a malfunction occurred, but also those that existed before and after the occurrence of the malfunction. It also provides the function (Plot) to draw graphs. Tech2 Self Test: Performs troubleshooting on the functions of the main unit. Caution: While this function is under execution, do not connect the unit to the machine! F1: Service Programming System (SPS) Set Clock: Sets the internal clock of the Tech2. Set Unit: Switches between the Metric system and the English system.
Set Contrast: Adjusts the brightness of the display. Note: Except industrial engine. F2: View Capture Data Allows to review data recorded under Snapshot of “F0: Diagnostics”. F4: Down Load Up Load Help The function to upload/download data (DTC, Snapshot, etc.) acquired through the Tech2 to/from a PC, and the Help function to render assistance in case the operation encounters a hitch. F3: Tool Options Offers the function to make settings for the Tech2 main unit, to display POST (Power On Self Test) results, and to perform detailed tests (PCB, VCI). List of functions of Tech2 TSWG0161