hitachi — DTC: P1262 (Flash code 159) Injection nozzle common 2 drive system fault

1E-472 Electronic control fuel injection system (Common rail type) Step Item to be checked Inspection method Measuring condition Terminal No. Normal value Abnormal value 5 Open circuit/ high resistance Resistance measurement • Remove the ECM-side harness connector from the coupling connector. • Key switch “OFF” 116 - Female-side terminal No. 3 100 Ω or less 10 MΩ or more Short circuit to ground Resistance measurement • Remove the ECM-side harness connector from the coupling connector. • Key switch “OFF” 116 - Ground 10 MΩ or more 100 Ω or less 9 Short circuit to ground Resistance measurement • Remove the ECM-side harness connector from the coupling connector.

• Key switch “OFF” 115 - Ground 10 MΩ or more 100 Ω or less 10 Short circuit to ground Resistance measurement • Remove the ECM-side harness connector from the coupling connector. • Key switch “OFF” 120 - Ground 10 MΩ or more 100 Ω or less 11 Short circuit to ground Resistance measurement • Remove the ECM-side harness connector from the coupling connector. • Key switch “OFF” 118 - Ground 10 MΩ or more 100 Ω or less 18 Short circuit to power supply circuit Voltage measurement • Remove the ECM-side harness connector from the coupling connector.

• Key switch “OFF” 115 - Ground 0V 18V or more 19 Short circuit to power supply circuit Voltage measurement • Remove the ECM-side harness connector from the coupling connector. • Key switch “OFF” 120 - Ground 0V 18V or more