hitachi — DTC: P1635 (Flash code 55) Voltage fault in 5-V power supply 5

1E-526 Electronic control fuel injection system (Common rail type) DTC:

P1635 (Flash code 55) Voltage fault in 5-V power supply 5 EGR position sensor signal Common rail pressure sensor signal G sensor signal EGR position sensor signal EGR position sensor signal 5V Engine control module (ECM) B+ B+ B+ 98 E-56 101 E-56 82 E-56 100 E-56 90 E-56 87 E-56 92 E-56 110 E-56 93 E-56 103 E-56 94 E-56 111 E-56 5 H-20 H-20 H-20 H-20 H-20 H-8 H-8 H-8 H-8 H-8 H-8 14 6 13 12 3 7 2 6 1 5 0.5 Br 0.5 L/W 0.5 L 0.75 L 0.75 GY 0.75 W/L 0.75 G/W 0.75 W/B 0.75 G/B 0.75 W/R 0.75 L/W 0.5 L/W 0.75 B/W 0.5 L 0.5 Br 1 E-80 2 E-80 6 E-80 3 E-80 7 E-80 4 E-80 8 E-80 5 E-80 1 E-112 2 E-112 3 E-112 1 E-113 3 E-113 2 E-113 W V U EGR position sensor/EGR motor EGR valve Common rail pressure sensor G sensor TSWG0080 Description of circuit Preconditions when DTC is set The 5-V power supply circuit is provided to the ECM for 5 systems.

The 5-V power supply circuit 5 supplies power to the common rail pressure sensor and the EGR position sensor. The ECM sets the DTC when the voltage in the 5-V power supply circuit 5 and 2 is higher or lower than the normal range. DTC P1630 is not detected. Key switch input power supply voltage is higher than 16 V but lower than 32 V. DTC set condition Key switch power supply voltage is 5.5 V or more, or 4.5 V or less. Main trouble symptom Action taken when DTC is set Engine blow up Output lowering Black smoke emitted Engine stall possible Trouble is displayed on the monitor of the machine or diagnosis lamp comes on.

Back-up mode Same to rail pressure sensor fault and EGR position sensor fault