hitachi — Main data and specifications

1B-10 Engine Mechanical (6WG1 (Common rail)) Inspection and adjustment of the belt Inspect for belt wear and cracking. Tension adjustments of the generator drive belt 1. Tighten the idle pulley lock nut and generator section lock nut. 2. Adjust the belt tension so it becomes equal to the standard value by adjusting the idling pulley adjustment bolt and generator section adjustment bolt. 3. The amount of tension when 98N {10kgf m} is applied to the centre between the idling pulley and generator pulley. Legend 1. Lock nut (generator) 2. Adjustment bolt (generator) 3. Lock nut 4. Adjustment bolt (Idling pulley) 5. Belt tension measurement position 6.

Installation bolt Standard value mm 6 ~ 8 Main data and specifications Model 6WG1-TC Item Engine model Water cooled 4 cycle series connected type 6 cylinder 24 valve OHC direct injection diesel Cylinder array and number – bore × stroke (mm) L6 – φ147 × 154 Displacement (L) 15.681 Compression ratio 16.0 Compression pressure kPa/rpm (kgf/ cm2/rpm) 2750(28)/200 Dimensions (length × width × height) (mm) 1463 × 1036 × 1432 Weight (kg) 1185 Fuel injection order 1-5-3-6-2-4