hitachi — Removal

Engine Mechanical (6WG1 (Common rail)) 1B-23 13. Remove the oil port. Remove the oil cooler locking bolt, insert and tighten the removed bolts into the replacer holes (2 places) and remove the oil cooler. 14. Remove the water drain pipe and connector for the drain pipe. 16. Remove the level gauge and guide tube. 17. Remove the intake pipe. Legend 1. Connector 2. Water drain pipe 3. Drain cock 4. Bolt Legend 1. Intake manifold 2. Gasket 3. Bolt 4. Bolt 5. Intake pipe 15. Remove the oil cooler.