hitachi — Injector ID code (No. 1 cylinder - No. 6 cylinder) registration setting using Tech2

1E-58 Electronic control fuel injection system (Common rail type) Step 9 Choose the menu F4: Programming with , (up/ down) keys or F4 (function) key, and press [ENTER]. Step 11 Choose the menu F1: ID code registration with , (up/down) keys or F1 (function) key, and press [ENTER]. F0: Displays the Injector ID codes (hereinafter called ID code) of Cyl.1-Cyl.6. Allows you to confirm the ID code after registration. F2: Uploads (transfers) the ID code (No. 1 cylinder No. 6 cylinder) registered in the ECM to Tech2 to store in its memory. F3: Allows you to download (batch registration) the uploaded ID codes from Tech2 to the ECM. TSHK0050 Step 10 Choose the menu F1:

Injector ID code with , (up/down) keys or F1 (function) key, and press [ENTER]. Step 12 Press the softkey [Next]. As an example, the vehicle will be checked whether it is in the condition (engine stopped) that the ECM requests during ID registration. TSHK0067 TSHK0108 TSHK0068