hitachi — ID code upload (Tech2)

1E-64 Electronic control fuel injection system (Common rail type) Step 12-2 When the ID code registered in the ECM corresponds to that uploaded to the Tech2, the following message will appear. Upload is completed. Pressing the softkey [Confirm] returns you to Step 11. Step 12-4 Pressing the softkey [Confirm] returns you to Step 11. TSHK0065 Step 12-3 When the ID code registered in the ECM does not correspond to that uploaded to the Tech2, the following message will appear. Pressing the softkey [Confirm] returns you to Step 11. In this case, the uploaded ID code will be erased. Therefore, perform upload again. The message shown in Step 12-4 will appear. TSHK0063 TSHK0064