Fuel system (6WG1 (Common rail)) 1D-5 Functional check: Fuel filter water drainage 1. Loosen the fuel filter air bleed plugs (2). 2. Loosen the fuel filter drain plugs (4) and perform water drainage. 3. Loosen the drain plugs (4). 4. Perform air bleeding from the fuel. Legend 1. Priming pump (Fuel filter) 2. Air bleed plug 3. Fuel filter 4. Drain plug 5. Priming pump (supply pump) 6. Supply pump Legend 1. Priming pump (Fuel filter) 2. Air bleed plug 3. Fuel filter 4. Drain plug 5. Priming pump (supply pump) 6. Supply pump 3. Loosen the supply pump's air bleeder and continue to move the priming pump until air bubbles stop coming out. Fuel air bleeding 1.
Loosen the fuel filter air bleed plugs (2). 2. Move the supply pump's priming pump, bleed the air from the fuel filter, and fix the priming pump. Move the fuel filter's priming pump and bleed the remaining air. Tighten the air bleed plugs (2). Notes: Fuel filter air bleeding should be done one side at a time. Important: Over tightening the air bleed plugs can cause damage. Legend 1. Priming pump (supply pump) 2. Air bleed plug 3. Overflow pipe (supply pump) 4. Drain plug 5. Priming pump 6. Supply pump 4. Tighten the supply pump's air bleeder.