Fuel system (6WG1 (Common rail)) 1D-11 Pre-filter 2. Install the O-ring to the case. Always use a brand new O-ring. 3. Insert a level ring into the case. 4. Use a wrench and tighten the case. Use a wrench to exchange the cartridge. Wrench; Pre-filter: 8-9802-1941-0 Wrench; Main filter: 8-9801-3170-0 Tightening torque: 29.4 N m {3.0 kgf m} Legend 1. Level ring 2. O-ring 3. Case 5. Install an O-ring to the drain plug. Always use a brand new O-ring. 6. Tighten the drain plug to the tightening torque. Tightening torque: 2 N m {0.2 kgf m} 7. Tighten the air bleed plug to the tightening torque. Tightening torque: 9.8 N m {1.0 kgf m}