Electronic control fuel injection system (Common rail type) 1E-73 Graph display 6. Graph display can be moved with the navigation icons. 7. If you wish to view the graph with different parameter, drag the parameter in the list onto the display screen. (Click the parameter and move the cursor with the mouse button pressed, and then release the mouse button in the display screen.) New parameter appears to replace the old one. To view the graph in full screen, move the cursor to the top of the screen, and click the screen where the cursor changes to magnifying glass icon. This will display the graph in full screen. Numeric value and graph (up to 3 for graph display): 1.
Clicking the icon for graph display opens “Graph Parameters” window. 2. Click the 1st graph icon in the top of the window, and select one parameter from the list in the bottom of the window. Selected parameter is shown next to the graph icon. Graph category can be selected with the field located in the right hand of the parameter. 3. Perform the same procedure for the 2nd and 3rd graph icons. 4. After selecting all the parameters (up to 3 parameters) you wish to view, click the [OK] button. Graph display in one frame (up to 6 for graph display) 1. Click the “Six graph” icon. This opens “Graph Parameters” window. Fig. 4: “Graph Parameters” window (sample) 5.
Selected parameter is shown in graph form, in the right hand of the data parameter on the screen. Fig. 6: “Graph Parameters” window 2. Click the graph icon, and select the parameter you wish to view from the list. Change the graph category as required. 3. Perform the same procedure for the 2nd to 6th parameters with graph icons. 4. Clicking the [OK] button displays the graph. Fig. 5: Graph display screen (sample)