USING THE WORK EQUIPMENT 3.13.7.2 CONNECTING THE BUCKET q Avoid using your fingers to align the holes, since they may be cut in case of sudden or uncontrolled movemen- ts. 1 - Make sure that the lever (1) is rotated completely to the left and that the coupling pins (2) have moved completely backward. 2 - Incline the tool-holder (3) forward and gradually approach the bucket (4) until centering its upper lip with the edge of the tool-holder cross member. 3 - Slowly raise the arm and at the same time fold the tool- holder until it is completely engaged in its seat. 4 - Fold the bucket completely. 5 - Stop the engine, release the residual pressures and lock the safety bars.
6 - Couple the bucket by rotating the lever (1) completely to the right and fix it in this position with the retainer (5). Before moving the machine, make sure that the pins (2) are completely engaged in the seats provided on the buc- ket. 140 WARNING