Komatsu — 3.15.2 IF THE FUEL HAS BEEN COMPLETELY DEPLETED

TROUBLESHOOTING 3.15 TROUBLESHOOTING 3.15.1 HOW TO REMOVE THE MACHINE q When removing the machine, use a wire rope suitable for the weight of the machine to be removed. If the machine gets stuck in mud and cannot get out using only its motive power, or in case of breakdown, use a wire rope as shown in the figure on the right. IMPORTANT RWA37570 q In case of failure of the hydraulic circuit, before recover- ing the machine release the negative brake installed on the rear axle ( "4.8.1.d RELEASING THE PARKING BRAKE").

3.15.2 IF THE FUEL HAS BEEN COM- PLETELY DEPLETED Before starting the engine when the fuel has been completely depleted and therefore air has entered the fuel supply circuit, it is necessary to bleed the fuel supply circuit. For the necessary operations, see "4.8.8 MAINTENANCE EVERY 500 HOURS OF OPERATION". 145 DANGER