Komatsu — 4.2.1.2 COOLANT

MAINTENANCE NOTES 4.2 MAINTENANCE NOTES q Use only Komatsu genuine spare parts. q Do not mix different types of oil. q Unless specified otherwise, the oils and the coolant used by Komatsu to fill the tanks before the delivery of the machine are the following: 4.2.1 NOTES REGARDING THE ENGINE 4.2.1.1 ENGINE OIL q The engine oil must be selected very carefully, since it lubricates the engine, which is the machineнs heart; the main maintenance operations required for the engine oil are the following: 1 - daily check of the oil level; 2 - check of the oil pollution degree; 3 - periodical change.

4.2.1.2 COOLANT q The coolant serves to keep the engine at the correct temperature and therefore to ensure optimal operating con- ditions; check the coolant level in the expansion tank daily and top up if necessary. q The coolant containing antifreeze is flammable; do not use naked flames near the coolant and do not smoke whi- le topping up. q Use only permanent ethylene glycol-based antifreeze with the addition of anticorrosion and antifoam products. The antifreeze-water ratio must be 50% (50% antifreeze and 50% water). q The use of permanent antifreeze requires only the routine change. It is not necessary to wash the cooling circuit. q Use drinkable water and in any case soft water.

q Do not use corrosion inhibitors containing soluble oil, since they damage the rubber couplings. q The required standards for permanent antifreeze are the following: SAE-J1034 and FEDERAL STANDARD O-A- 548D. In case of doubt regarding the compliance of the antifreeze used with the standards, contact your Komatsu Dea- ler and ask for precise information.

156 ITEM SPECIFICATIONS q Engine oil SAE 10W-30 API classification CD q Hydraulic system and hydrostatic transmission oil SAE 10W API classification CD q Biodegradable hydraulic system oil (only for machines filled with synthetic biodegradable oil type HEES not of plant origin) SHELL NATURELLE HFX-32 q Final transmission oil SAE 10W-30 API classification CD q Fuel Ambient temperature above -10ºC: ASTM D975 no. 2 diesel oil Ambient temperature below -10ºC: ASTM D975 no. 1 diesel oil q Radiator Permanent, ethylene glycol-based antifreeze, with corro- sion inhibitor for protection up to -36ºC.