MAINTENANCE PROCEDURE 2 - Drain the hydraulic oil (see "4.8.9.b CHANGING THE HYDRAULIC SYSTEM OIL AND CLEANING THE SUC- TION FILTER"). 3 - Once the oil has been drained, disconnect the suction pipe (3) and remove the flange (4) after removing the screws (5). Use a 17 mm hexagon spanner. 4 - Change the filtering element (6). 5 - Put back the flange (4), the filter (6), the gasket (7) and the lower plug (2). 2 6 - Complete the tank filling operations by proceeding as de- scribed in paragraph "4.8.9.b CHANGING THE HYDRAU- LIC SYSTEM OIL AND CLEANING THE SUCTION FILTER". RWA34230 q Never start the engine with empty tank, since this would 7 4 6 3 certainly damage the pump.
RWA36400 5 4.8.10.c CHECKING THE ALTERNATOR AND THE STARTER For any inspection and/or repair, contact your Komatsu Dealer. If the engine is started frequently, the alternator and the starter should be inspected every 1000 hours of operation. 202 CAUTION