MAN — Checking start of delivery

Checking and adjusting start of fuel delivery Fig. 5 Remove screw plug for inspection hole in mounting flange of injection pump. 5 4285 Fig. 6 The start of delivery is set correctly if the marking in the long hole of the pointer is visible. If the inspection should reveal that start of delivery is set incorrectly, proceed as follows: 6 2329 Adjusting start of delivery Fig. 7 Remove timing case cover. 7 4290 Fig. 8 Loosen all bolts fastening the drive gear to the in- jection pump hub. For this, two complete turns of the engine are necessary. Turn the injection pump camshaft at the drive flange either to the left or right until the marking reaches the position shown in Fig. 6. 8 4288 26