Removing and installing intake manifold D Remove air filter Note: When carrying out work on the intake sys- tem, ensure meticulous cleanliness to pre- vent dirt and foreign matter from penetrat- ing into the system. Removing intake manifold Figs. 1 and 2 Remove fuel filter and electro-hydraulic shut-off device (EHAB). 1 4363 Caution: The lines contain fuel. Catch emerging fuel in a suitable con- tainer. 2 4366 Fig. 3 Loosen mounting bolts and remove intake pipe. 3 4364 Installing intake manifold Fig. 4 Place intake manifold with new seals in position. Tighten mounting bolts to the specified torque. Ensure that the seals are correctly seated. 4 4365 63