MAN — Removing and installing cylinder head

Removing and installing cylinder head Fig. 5 Remove cylinder head bolts in reverse order of tightening. Note: Use reinforced socket (screw-driving ma- chine) to loosen and tighten the cylinder head bolts. On engines recently manufactured Torx bolts are fitted for which an E20 − 1/2” wrench is required. 5 4385 Fig. 6 Loosen all mounting bolts from the intake and exhaust manifolds. This will reduce the tension on the cylinder head, and the head can be taken off more easily. Fig. 7 6 4364 Take off cylinder head and cylinder head gasket. Note:

If within the context of an engine overhaul all cylinder heads of a bank are removed, check the sealing faces of the cylinder heads and of the cylinder block with a straight edge to see whether they are plane. Cylinder heads which are not plane may be remilled by 1 mm. Observe specified nozzle protrusion and valve retrusion (see ”Engin- eering S Data S Setting values”). Check the cylinder heads for cracks. 7 3705 8 75