MAN — Refacing valves

Refacing valves Fig. 1 Apply abrasive paste to tapered area on the valve seat. Oil valve guide and insert valve. 1 3535 Fig. 2 Use valve refacer to reface valve seat by applying moderate axial pressure and describing a turning motion. Note: Keep valve stem and valve guide free of abrasive paste. 2 3591 Fig. 3 The valve seat must have a faultless, closed grind- ing pattern (2). The grinding pattern width is correct if the valve seat insert is in order. 1 2 1 Valve tapered area 2 Valve seat Fig. 4 3 2821 1 Valve seat insert 2 Valve 3 Valve seat good 4 Valve seat too wide 1 2 1 2 Note:

Valve seats which are too wide tend to ac- cumulate coking residues, − valves become leaky − Valve seats that are too small prevent rapid discharge of heat from the valve disc to the cylinder head, − valves burn − 4 3 4 2822 91