OWNER 爷 S MANUAL JAC HEAVY DUTY TRUCK SUNVlSOR HEATING AND VENTILATION Your JAC is equipped with two sunvisors to give the driver and passenger ei 鄄 Rotary Type (If installed) ther frontal or side ward shade. The sunvisors are fitted on both sides on There are four controls for the heating and cooling system. They are: standard models. To reduce glare or to shut out direct rays of the sun, turn the sunvisor down to block the annoyance. 1. Air Flow Control. This is us ed to direct the flow of air. Air can be directed to the floor, dash 鄄 Some vehicles are equipped with the front andside sunvisors for the driver, board outlets, or windshield.
Five symbols are used to represent Face, Bi - and the front sunvisor for the passenger. CAUTION: Level, Floor, Floor-Defrost and Defrost air positions. 2. Air Intake Control. Do not place the sunvisor in such a manner that it obscures visibility or the This allows you to select fresh outside air or to circulate inside air. roadway, traffic or other objects. 3. Temperature Control. AIR SPRAY NOZZLE This is used to select the degree of heating desired. 4. Fan Speed Control. Seperate the spray nozzle plug under the dash panel of passanger side and This is used to turn the fan on and select the fan speed. connect the air hose with this plug. Then you can clear your vehicle with air spray. 52 53