. SAFETY SAFETY MACHINE OPERATION SAFETY MACHINE OPERATION 2 - 20 STARTING ENGINE If t here is a warning tag hanging from the work equipm ent control lever, do not start the e ngine or touch the levers. CHECKS BEFORE STAR TING ENGINE checks before starting the engine at the work. Carry out the following beginning of the day's Remove all dirt from the surface of the window glas s to ensure a good view. Remove all dirt from the surface of the lens of the front lamps and working lamps, and check that they light up cor rectly. Check the coolant lev el, fuel level, and oil level in eng ine oil pan, check for clogging of the electric wiring.
the air cleaner, and check for damage to Adjust the operator's seat to a position where it is easy to carry out operations, and c heck that there is no damage or wear to the seat belt or mounting clamps. Check the operation of the instruments and gauges , check the angle of the mirror, an d check that the control levers a re all at the Neutral position. Before starting the e ngine, check that lock lever (1) is in LOCK position (L). that the rear of the machine can be seen ator's seat. "Rearview Mirrors (PAGE 3-88)".
Adjust the mirrors so that the rear of the machine c clearly from the oper When adjusting, see "Rearview Mirrors (PAGE 3-88 Check that there are no persons or obstacles abov e, below, or in the area around th e machine.