THE DRY AIR FILTER For maximum engine protection, the air intake system must be checked and serviced at regular intervals (fig.50). The air cleaner is designed to give maximum protection at longest maintenance intervals. Maintenance consists of replacing the filter elements 3 and 6. We do not recommend to clean the filter elements. The maintenance indicator (fig. 50, pos. 12) monitors the depression occurring at the filter outlet, during the Diesel engine operation. The coming out of a red stripe in the window 10 shows that the maximum permissible vacuum of 5 kPa (50 mbar) has been reached.
This status remains memorized even after the engine has been shut down (the red strip remains visible in the window 10). At that time, the corresponding primary filter element must be replaced. To reset the vacuum indicator, press the "Reset" button 11 (fig. 51). We recommend that the primary filter element 3 is only removed and replaced after the maximum permissible depression has been reached. However, it should be replaced at least once a year. Seals between filter elements and the housing 9 can be damaged if the filters elements are removed too often. The safety element 6 should be replaced after the primary element has been changed 3 times, or at least once a year.
Before the new element is installed, carefully clean the seal and the sealing surface of the filter housing 9. Manually press to open the dust discharge valve 2 (fig. 50) once a week so it does not stick together because of dust or humidity. 51 6.16 50