. OPERATION DETAILED CONTROLS AND GAUGES Auto Switch Display Monitor Monitor (7) displays the status of temperature setting (a), air flow (b), and vents (c). When OFF switch (1) is pressed, the display of temperature setting (a) and air flow (b) goes out, and operation stops. 3 - 89 With switch (RECIRC/FR ESH) are a utomati cally selected according to the set temperature. Press switc h (5), then use te mperatur e cont rol switch (3) to set the temper control.
When switc it is possib le to use the swit source (RE to selec REMARK When Auto M ode is selected, if the set t emperature is s et to 18.0 ° C (64.4 °F) o r 32.0 °C ( 89.6 °F) , the air f low is always s et to High, bu t this is not a problem . FRESH/RECIRC Selector Switch Switch (6) is u sed to switch the air sourc e between recir culation of the air inside the cab an d intake of fresh air fro m the ou tside. During auto matic operation, th e selection of i nside air ( RECIRC) and outsid e air (FRESH) is p erformed automatically. RECIRC Outside air is shut off and only air inside the cab is circulated.
Use this setting to perform rapid cooling of the cab or when outside air is dirt FRESH Outside air is taten into the cab. Use this setting to take in fresh air when performing demisting.