Komatsu — BEFORE STARTING ENGINE

. OPERATION MACHINE OPERATIONS AND CONTROLS MACHINE OPERATIONS AND CONTROLS BEFORE STARTING ENGINE work equipment and the WARNING the the Check thoroughly if there is any dust stuck particularly between exhaust muffler (1) and exhaust muffler cover (2). 3 - 110 Walk-around Checks Before starting the engin e, walk around the machine and look at the underside of chassis loose bolts and nuts, lea hydraulic system. kage of fuel, oil and coolant.

Also check the condition of the Also check for loose wirin g, play, and collection of dust at pla ces that reach high tempera When carrying out check or maintenance work inside the engine ho od or dust cover, be sure to op and secure them with a s topper. Remove any flammable m aterials from around the battery or engin e muffler, or other high temper of fuel or oil will cause th Komatsu distributor. e machine to catch fire. Check carefully, a nd sure to repair any abnormal If the machine is at an an gle, reposition it level before checkin g. Perform the following ins pections and cleaning every day bef ore starting engine for the d 1.

Check for damage, w ear, play in work equipment, cylinde rs, linkage, and hoses. Check that there are any problem is found no cracks, excessive wear, or play in the work equipment, cylind , repair it. 2. Remove dirt and dust from around engine, battery and radi Check if there is an engine or radiator. material (dead leave the battery or high engine muffler.

Remo y dirt or dust accumulated around Check also if there is any flamm s, twigs grass etc.) accumulated aro temperature engine parts, such as ve all such dirt or flammable materia For the removal of dust a nd dirt accumulated on the radiator f ins, see "CLEAN AND INS OIL COOLER FINS, AFT ERCOOLER FINS,FUEL COOLER F INS, AND AIR CONDITION (PAGE 4-73)". 3. Check for coolant an d oil leakage around the engine Check for oil leakage it. from the engine and coolant leaks fro m the cooling system. If any 4. Check for leakage fro m fuel line. Check that there is no carry out repairs. leakage of fuel or damage to the ho ses, a fuel cooler and tubes. 5.

Check for oil leakage from hydraulic equipment, hydraulic Check for oil leakage . If any problem is found, repair the a