Komatsu — BEFORE STARTING ENGINE

. OPERATION MACHINE OPERATIONS AND CONTROLS Check Oil Level in Engine Oil Pan, Add Oil WARNING Parts and oil are at high temperature immediately after the engine is stopped and may cause serious burns. Wait for the oil 3 - 113 temperature to go down before per forming thi 1. Open en 2. Remove dipstick (G) and w ipe the oil off wi th a c 3. Fully ins ert dipstick (G) into filler pipe , then remo 4. The oil le vel should be bet ween the H and L mark s on d ipstick (G). If the oil l (F). If oil spill off with a evel is below the L mark, ad d oil t hroug h oil fill er port s onto oil containe r (U) unde r the oil fille r port, wipe it cloth. 5.

If the oil i s above the H ma rk, drain th e excess e ngine oil from drain plu g (P), and check t he oil leve l agai 6. If the oil level is correct, tig engine hood. close the REMARK hine is at an angle, reposition it to level before checking. If the mac hine is at an angl e, repositio n it to level before checking. When che cking the oil level after the e ngine has b een o perated, allow the engine to cool for 15 minutes before checking.