Komatsu — AFTER STARTING ENGINE

. OPERATION MACHINE OPERATIONS AND CONTROLS AFTER STARTING ENGINE WARNING To stop the engine in emergencies or when the actuation of the engine starting suddenly out the oil in 3 - 134 is abnormal or there is any other trouble, turn the key in the on. ions or operate the levers or pedal s is at low temperature. Always carry switch to the OFF positi Do not carry out operat while the hydraulic oil warm-up operation for t temperature monitor dis he hydraulic equipment until the hydr plays the correct temperature. (When the hydraulic oil t emperature is low, the low temperature shown on the right is giv en. (A) Display when temper ature is correct:

Monitor background (C (B) Display when temper ature is low: Monitor background (C) i If the warm-up operation for the hydraulic equipment is not car thoroughly, and the mac hine is moved, the reaction of the contro and pedals will be slow a nd the movement may not be what the o intended. Always warm up the hydraulic equipment. In partic cold areas, always warm up the hydraulic equipment thoroughl There are two types of w arm-up operation: warm up the en gine and warm up the hydraulic equipment.

I n addition, depending on the envir onment, the method of carrying o ut the warm-up oper ation may differ, so carry out the warm-up operation acco rding to the items given in the app ropriate section. (When only the engine is warmed up, the hydraulic equipm ent is not warmed up , so always carry out the warm-up operation for the hydrauli c equipment separately from the w arm-up operation for t he engine.

Warm up the hydraulic equipment thoroughly e nsures that the hydraulic oil is warmed up and that warm hydraulic oil circulates in all the m hydraulic oil circulate control circuits.) Checking of Engine Startability and Noise When starting the engine , check that the engine causes no abnormal noise and th at it starts up easily and smoothly. Check also that there is no abnormal noise when the engin e is idling or when th e revolution rises slightl y. e may be When there is an ab normal noise at the engine startu p and if that conditio n continues, the engin soon as possible. damaged.

In that cas e, ask your Komatsu distributor to check the engine as Checking of Engine Acceleration and Deceleration When stopping the mach ine during the operation, check tha t there is no irregular e ngine revolution or that t he engine does not stop suddenly. ne speed rises smoothly when the fuel control dial is turned to the full (Max). ks in a safe place, watching out for danger in the surroundings.

forms very badly at low idling and in the acceleration and if that condition continues, the Check also that the engi ne speed rises smoothly when the fuel control dial is tur Carry out these chec ks in a safe place, watching out for danger in the surrou When the engine per forms very badly at low idling and in the acceleration a engine may be damag ed or confuse the operator's sense of driving or lower the braking efficiency, and as a result lead to an unexpecte possible. d accident. In that case, ask your Komatsu distributor to check the engine as soon as