Komatsu — AFTER STORAGE

. OPERATION LONG TERM STORAGE LONG TERM STORAGE BEFORE STORAGE DURING STORAGE WARNING 3 - 188 NOTICE To protect the hydraulic cylinder piston rod while in storage, keep th equipment in the postur e shown at right. developing on the piston rod) (This prevents rust from When keeping in long -term storage (more than one month) , store as follows . Clean and wash all parts, then store the machine indoors . If the machine has to b e store d outdoors, sel ect level ground and cover t he machine with a sheet. collecting. rod with grease. Completely fill the f uel tank. This prevents moisture from Lubricate and chan ge the oil before storage.

Coat the exposed portion of the hydraulic cylinder piston rod with grease. Disconnect the neg ative terminals of the battery and cove r it or remove it fro m the m achine and s tore it sep arately. Lock each control l ever and pedal with the lock lever and lock cover. Set the stop valve t o the LOCK position on machines rea dy for attachment s. Instal l the bl ind plu gs to the elbows. Set the selector va position. lve on the machines which can install attachments to the "Crusher or general attachment" chment" To prevent rust, fill with Komatsu genuine supercoolant (A F-NAC) to give a densit y of at l east 30 % for th e engine coolant.

If it is necessary to perfo rm the rust-prevention operation while the machine is indoors , open t he door s and w indows to improve ventilation and prevent gas poisoning. During storage, op erate and move the machine for a shor t distance once a month s o that a new film of oil will coat moving parts. At t he same time, also charge the battery . ase from the hydraulic cylinder rods. When operating th e work equipment, wipe off all the gre ase from the hydraulic cy linder If the machine is eq uipped with an air conditioner, operat e the air condition er for 3 to 5 m inutes once a month to lubricateall parts of check the refrigera the air conditionercompressor.

Alway s run the engine a t low id le whe n doing this. In addition, nt level twice a year. AFTER STORAG E NOTICE If the machine has been stored without carrying out the monthly rust-prevention op eration, consult your K omatsu d istributor before using it. When using the mach ine after long-term storage, do as foll ows before using Wipe off the greas e from the hydraulic cylinder rods. at all lubrication points. Add oil and grease