. OPERATION TROUBLES AND ACTIONS Connecting and Disconnecting Booster Cables WARNING cable, always wear safety structure frame), a spark will be as far away from the battery as exercise good care so that the each other, or they contact the 3 - 196 Starting Engine with Booster C When starting the engine with a boo Whe n connecting the cables, never co (-) te Whe Be c areful not to let the normal machi each other. This prevents sparks from coul d ignite the hydrogen gas given o explodes, it could cause serious injur Be c areful not to make a mistake whe the l possible. (Avoid the work equipment, conductor) When removing the booster cable, Whe booster cable clips may not contact chassis.
NOTICE size of the booster cable and clip should be suitable for the battery size. The size of the booster cable and clip should be suitable for the battery size The battery of the normal machine m ust be the same capacity as that of the engine to be s tarte The starting system for this machine uses 24 V. For the normal machine , also use a 24 V b attery Chec k the cables and clips for damag e or corrosion. re firmly connected. chines are in the LOCK position. AL position. Make sure that the cables and clips a Chec k that the lock levers of both ma Chec k that each lever is in the NEUTR