Komatsu — WHEN REQUIRED

. MAINTENANCE MAINTENANCE PROCEDURE MAINTENANCE MAINTENANCE PROCEDURE Loosening Track Tension WARNING the procedure given below. If the track tension is not 4 - 32 Prepare a grease 1. Pump in greas e through grease fitting (5) wi th a grease p ump. To check that t idle, move the he track tension i machine forward s correct, ru a distance n the engine equal to the l at low ength of track on gro Check the rub und, then stop th ber shoe tension e machine. again, and i correct, adjust 4. If the tension i s still low after su pplied greas e, the rubber shoe needs to be re placed or the se al in the cyl inder needs replaced. Ask your Komatsu di stributor for r eplacement.

It is extremely dang erous to release th e grease by a ny method ex cept relieved by this proc edure, please conta ct your Koma tsu distributo r. 1. Loosen plug (4 ) gradually to rel ease the gre ase. of one turn. 2. When loosenin g plug (4), turn it a maximum of one turn. 3. If the grease d forwards and b oes not come ou ackwards a shor t smoothly, t distance. move the machine 4. 5. Tighten plug ( To check that t 4). he track tension is correct, run the engine at low idle, move the machine forward a distance equal to the l ength of track on gro und, then stop th e machine. 6. Check the rub ber shoe tension again, and i f the tension is not correct, adjust it again.

REPLACE ROA D LINERS d with road liner) all the road liner for the machine, please contact your Komatsu distributor to have the rried out. (Machine equippe d with road liner) When replacing replacement ca When replacing only part of the ro ad liner, use the special r oad line r remov al tool. Pleas e order th e tool fro m your Komatsu distrib utor.