Komatsu — EVERY 250 HOURS MAINTENANCE

. MAINTENANCE MAINTENANCE PROCEDURE Adjustment NOTICE replacement. 4 - 62 1. Rotate the uppe r structure approx. 15° to the le ft, lower the work equipment completel y to the ground, then stop the engine. For details of t GETTING ON 2. Remove center cover (1) and inspecti on cove r (7). 3. Loosen mounti ng bolt (3) of alternator 4. Loosen alternat or lock bolt (4) 5. Turn tension bo lt (5) of alternator (2) i n the directio n to tighten it and adjust so tension 0.4-0.5 in) (approx. 58.8 N When doing thi s, do not touch double 6. Tighten mounti ng bolt (3) and lock bo 7. Tighten nut (6). 8.

Install center co ver (1) and inspection cover (7 Check each pulley for damage, wear of the V-groove , and wear of the V-belt. In particula bottom of the V-gr If the belt is stretch ed and there is no allow ance for a djustment, or if it is cut or cracke for