Komatsu — EVERY 1000 HOURS MAINTENANCE

. MAINTENANCE MAINTENANCE PROCEDURE CHANGE OIL IN SWING MACHINERY CASE WARNING under the drain underside to drain oil, to 93 Nm (4.5 to 9.5 4 - 77 EVERY 1000 HOURS MAINTENANCE Carry out th e periodic mainte nance work o f every 100, 250 a nd 500 hours of operation at the same time The parts an d oil ar e at high tem perature after t he engin e is s topped , and may cause serious burn s. Wait for the tem perature to go d own bef ore starting the ope R efill cap acity: 2.0 liters (0 1. ontainer plug (P) at the bottom of the machine. 2. Loosen drain plug (P) o n the machine and tigh ten it again after the draining. Tighten ing torque of drai 3.

Add the specified amount of engine oil through dipstick (G) ort. f oil on the dipstick (G) with cloth. sert dipstick (G) into filler pipe, then remove it. insert p 4. Wipe of f oil on the dipstic k (G) with clo 5. Fully in sert dipstick (G) i nto filler pipe, t hen remove 6. The oil should be betwee n the H and L marks on di pstick (G). If the o il is b elow the L mark, add oil through the dipstick insertio n port. 7. If the oi l is above the H m ark, drain the excess engi ne oil from drain pl ug (P), and check the oil level a gain .