. MAINTENANCE MAINTENANCE PROCEDURE REPLACE HYDRAULIC OIL FILTER ELEMENT WARNING stopped, and may cause burns. Wait for the deteriorate much faster than during normal bucket BREAKER (PAGE 4-17)" when carrying out maintenance. 4 - 80 Th temperature to go d own befor e starting the work When remov ing the oil f iller c ap, turn it slowly to release the internal pressure ngine is NOTICE If the is equipped with reaker, the hy draulic oil will operations. Fo MAINTENANC INTERVAL 1. Retract th e arm and buck et cylinders, then lower th e boo m and put the te eth in contact w ith the ground. 2. Lower the blade 3. Set the lo ck leve r to the L OCK position (L) and stop the e ngine.