Komatsu — EVERY 1000 HOURS MAINTENANCE

. MAINTENANCE MAINTENANCE PROCEDURE CHECK ALL TIGHTENING POINTS OF ENGINE EXHAUST PIPE CLAMPS CHECK OIL LEVEL IN PTO GEAR CASE, ADD OIL WARNING the engine is stopped and may cause serious burns. Wait for the oil oil is near plug 4 - 87 Pleas e ask y our Komatsu d istributor to check the tightening of the clamps between the air cl eaner - turbocharge - aftercooler - Parts a after temperature to go down before performing t his operatio 1. Swing th e upper structu re so that th e PTO ge ar cas e is i n the middle between the left an Stop the engine and se t the lock lev er to t he L OCK position. 2. Remove undercover (1) at the botto m of t he m achin 3.

Remove oil inspection th e botto m of the plug h 4. If t he oil l evel is low, op emove from oil fi to the bot ller (F), and ad tom of the hol d oil. Add oil until e of oil inspection the plug oil leve (G). 5. Install oil inspection plu g (G) and the plug of o il filler 6. Install un dercover (1) at the bottom of the