Komatsu — ATTACHMENT REMOVAL AND INSTALLATION

. ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT ATTACHMENTS AND OPTIONS MACHINE READY FOR ATTACHMENT (a). (direction of arrow is parallel to flow (direction of arrow is at 6 - 10 6. Ope n mud 7. Loosen bolt (2), then remove plate (3) on top of oil filler port (F). 8. Remove the cap from oil filler port (F), and release the internal pressure 9. Afte r checking that the oil tempera ture is low, remove the covers from the inlet port and o utlet port (2 places). Be c areful t hat no dirt or mud is st uck to the hose mouthpiece. If th e O-ring is damaged, replace i 10.

Connect the hose at the attachme Wh en doing this, check the directi on of flow of the oil and be careful not to make any mis 11. Set the r oto r of the stop valve inst alled to the inlet port on the side ydraulic oil flows (dire ong direction of arm) Hydraulic oil does not f (b) LOCK: ight angles to long dire W hen setting the FREE or LOC K position of the stop valve tor, remove bolt (2), turn over plate (1), then turn the rotor. fter setting, install plate (1) ag 12. Afte r installing the attachment, che