2) GENERAL REPAIR GUIDELINES GENERAL REPAIR GUIDELINES Observe the following guidelines when carrying out repairs on hydraulic pumps. Close off all openings of the hydraulic unit. Replace all of the seals. Use only original spare parts. Check all sealing and sliding surfaces for wear. Re-work of the sliding surfaces by using, for example abrasive paper, can damage the surface. Fill the hydraulic pump with hydraulic oil before commissioning. ц (1) (2) (3) ц (4) 3) SEALING THE DRIVE SHAFT SEALING THE DRIVE SHAFT Protect the drive shaft. Remove the circlip. Remove the shaft seal.
(1) 1 1 Circlip 2 Shaft seal 2 75796WE60 (2) Change the shaft seal and check its sliding surface (drive shaft) and housing, grease the sealing ring. 75796WE58 (3) Assemble the sealing ring, fitting tool holds the correct position of the sealing ring in the pump housing. Assemble the circlip in the correct position. 75796WE59 75796WE59 6-66