. OPERATION EXPLANATION OF COMPONENTS to right to turn the the 3 - 56 STEERING, FORWARD-REVERSE, GEAR SHIFT LEVER (PCCS lever) This lever (2) is used to switch between forward and reverse steer the machine, or carry out counterrotation turns. (PCCS lever) This lever (2) is used steer the machine, or carry out counterrotation tu REMARK d control system not be equipped with this adjustm PCCS: Palm comman Your machine may machinery, depending on your machine's specifications. Forward-reverse sh ifting RD E Position (a): FORWA Position (b): REVERS Position N: NEUTRAL Move to the front to dr ive forward; move to the re ar to drive in Steering Position (L):
Left turn n to the front or rear, operate the lever partially to the left or r ually in the same direction as the lever is operated. ully to the left or right, the machine will turn in a small radius. Position (R): Right tur With the lever moved he machine will turn grad ually in the same direction as the lever i s operated If the lever is moved f ully to the left or right, the m achine will t urn in a small e. The REMARK If the lever is released when steering the machine , the lever w ill return to the (a) pos ition or the ( b) position a nd the machine will be return ed to straight movement.
Gear shifting When the steering, f orward-reverse, gear shift lever is in FORWARD or REVE RSE position, press switch (c) or (d) to me the switch is pressed, the transmis 1 speed range. (c) or (d) to the transmission. up switch (c): Each ti shifts up down switch (d): Each time the switch is pressed, t he transmis shifts down 1 speed range. For details of the maxi mum travel speed in each s peed range, "SPECIFICATIONS ( PAGE 5-2)". REMARK sion is shifted, the speed range being used is displayed on the speed range display on the yed on the display. 2 is displayed on the display. is displayed on the display. ever is locked, P is displayed.
earshift operation using the preset mode, see "SHIFTING GEARS (PAGE 3-123)". Preset When the transmis sion is shifted, the speed ra nge being u sed is displayed on t machine monitor. Example: Neutral: N is displa FORWARD 2nd: F REVERSE 3rd: R3 When the parking l 2 is displayed on the displa is displayed on the display ever is locked, P is displaye For details of the g earshift operation using the E 3-123)". Preset mode selection me ans the operation to set the selected sp eed range beforehan d in the N po sition. nge display on the