. OPERATION EXPLANATION OF COMPONENTS DISPLAY MONITOR Monitor (7) displays the state of temperature setting (a), air flow (b), and vents (c). When OFF switch (1) is pressed, the display of temperature setting (a) and air flow (b) goes out, and operation stops. 3 - 80 AUTO SWITC With switch ents urce (RECIRC/FR ESH) are a utomati cally selecte d according to th e set temperature. Press switc h (5), then use te mperatur e control switc h (3) t o set the temper control.
ature, and run the air conditioner under automatic When switc hing from automatic operation to manual operation, it is possib le to use the swit source (RE REMARK When Auto M ode is selected, if the set t emperatu re is set to 18.0 °C (64.4 °F) or 32.0 °C ( 89.6 °F), the air flow is always set to High, but t his is n ot a problem. RECIRC/FRESH SELECTOR SWI TCH Switch (6) is u sed to switch the air source between recirculati on of the air inside the cab an d intake of fresh air f rom t he outside . During auto matic operation, th e selection o f insi de air (RECIRC) and outside air (FRESH) is p erformed automatically. RECIRC Outside air is shut off and only air inside the cab is circulated.
Use this setting to perform rapid cooling of the cab or when outside air is dirt FRESH Outside air is taken into the cab. Use this setting to take in fresh air when performing demisting.