Komatsu — SHIFTING GEARS

. OPERATION OPERATION OPERATION OPERATION 3 - 128 Manual shift mod Changing max imum speed range use d when travelin When travelin g forward: Possible to ch ange speed ra nge used to F1 to F3 When travelin used to R1 to up switch (a): Ea ch time it is pressed, sp eed range use d goes up 1 r ange down switch (b): Each time it is pressed, speed range u sed goes down 1 range REMARK F3L and R3L a re speed ranges where the engine spe ed is controlled at 3rd and the spee d range is set to a range between 2nd a nd 3rd. When starting the machine up a slope in 3L, dependi ng on the condition, the machine m ay be started in 2nd to ensure safety.

For example, when shif ting from N to F 3L when starting off up a slope, the transmission may shift first from N to F2, and then shift to F3 L according to t he load. In automatic s hift mode, if the maxim um speed rang e has been forward-revers e, gear shift lever to the Neutral positio n. The setting is returned to the ma ximum speed range set in the preset m ode before starting to t ravel (when the transmission was at neutral). In the automat ic shift mode and manu al shift modes, the preset (speed range to start) ca nnot be changed while the machine is traveling.