Komatsu — ADJUSTING POSTURE OF WORK EQUIPMENT

. OPERATION OPERATION Straight tilt dozer Straight tilt power pitch dozer Sigma dozer Sigma power pitch dozer Angledozer ADJUSTING TENSION OF CENTER BRACE (Straight tilt dozer) (Straight tilt power pitch dozer) (Sigma dozer) (Sigma power pitch dozer) If the work equipment assembly is removed for transportation and is assembled again after transportation, the tension of the center brace must be adjusted. If this is not done, the bushing at the connecting part of the blade and straight frame will come out, and sand and soil will enter. This will cause premature wear or damage of the bushing. Adjust the tension of the center brace.

For details, see "ADJUSTING SHIMS, ADJUSTING TENSION AT WORK EQUIPMENT LINKS (PAGE 4-45)". 3 - 143 ADJUSTING SHIMS IN ASSEMBLING WORK EQUIPMENT When assembling the wo rk equipment, if the adjustmen t of the pla y is not carried out prop erly, excessive bending stress will be generated a t all parts, and this will lead to cracks or b reakage. Adjust the play of parts (1) to (4) to the correct value. For details, see "ADJUSTING SHIMS, ADJUSTING TENSION AT WORK EQUIPMENT LINKS (PAGE 4-45)".

When disassembling t he machine for transportation, be careful not Shim adjusting position Item (1) Tilt (2) Lift (3) Center (4) Trunnion Optimum value mm (in) 0.2 to 0.7 (0.008 to 0.028) 0.2 to 0.7 (0.008 to 0.028) 0.2 to 0.7 (0.008 to 0.028) 0.2 to 1.2 (0.008 to 0.047) Thickness of standard shims mm (in) 5 (0.197) 4 (0.158) 5 (0.197) 10 (0.4)