. OPERATION TRANSPORTATION UNLOADING WORK referring to the section, "STARTING IN COLD (When transporting with work equipment installed) 3 - 159 1. Unload on firm lev el ground only. Maintain a safe di stance from the 2. Apply the trailer br akes securely and put blocks (1) under the tires to hold the tra iler in position.Set gap (3) betw een ramps (2) to match the dis tance between the left and right t racks, and keep angle (4) to a maximum of 15 deg. If ramps (2) bend a ppreciably under the we ight of the machine, put wooden block (5) under the ramps to support th 3. Remove the chain s and wire ropes fasten ing the m achine. 4. Start the engine.
In a cold weather warming WEATHER (PAGE 3-117)", in this manua 5. Set main work equ ipment lock lever to FR EE positio n (F), and raise the work equ 6. Set parking brake lever to FREE position (F). 7. Set the transmissi on in the 1st gear and r un the en gine at low idle. tion toward the ramps and drive slowly. 8. Set the travel direc tion toward the ramps and drive slowly. 9. The center of gra border between th unbalanced and b vity of the machine shi e ramps and trailer, a ecomes dangerous. Ac fts sudde nd the m cordingly nly at achin , pass the e is the 10. border slowly. Drive down the ra mps slowly and carefully until the machine erfectly. leaves the ramps p