Komatsu — HANDLING OIL, FUEL, COOLANT, AND PERFORMING OIL CLINIC

. MAINTENANCE OUTLINE OF SERVICE 4 - 6 FUEL To prevent the moisture in the air from condensing and forming water inside the fuel tank, always fill the fuel tank after completing the day's work. ion instrument, and if fuel containing water or dirt is used, it cannot work properly. o let impurities get in when storing or adding fuel. fied for the temperature in the Operation and Maintenance Manual. The fuel pump is a precis ion instrument, and if fuel containing water or dirt is used, it cannot work pro Be extremely careful not t o let impurities get in when storing or adding fuel.

Always use the fuel speci fied for the temperature in the Operation and Mai If the fuel is used at tem °C (5°F), the fuel will s If the fuel is used at te result in problems suc peratures lower than the specified temperature (p articularly at temperatures below -15 olidify. mperatures higher than the specified temperature, the viscosity will drop, and this may h as a drop in output. Before starting the engine , or when 10 minutes have passed after adding fue l, drain the sediment and w ater from the fuel tank. If the engine runs out of f uel, or if the filters have been replaced, it is neces sary to bleed the air from t he circuit.

If there is any foreign mat erial in the fuel tank, wash the tank and fuel syste m. NOTICE l. Always use diesel oil for the fue To ensure good fuel consumpti on characteristics and exhaust gas characteristics, the e ngine mounted on this machi ne uses an electronically controlled high-p ressure fuel injection device. This device requires high precision parts and lubrication , so if low viscosity fuel with low lubricati ng ability is used, the durability may drop markedly. COOLANT AND WATER FOR DILUTION RCOOLANT (AF-NAC) has the important function of preventing corrosion as well as reezing is not an issue, the use of antifreeze coolant is essential. Komatsu genuine SUPE preventing freezing.

Even in the areas where f Komatsu machines are su excellent anticorrosion, an As a basic rule, we do not another coolant, it may c cooling system. reezing is not an issue, the use of antifreeze cool pplied with Komatsu SUPERCOOLANT (AF-NAC ). SUPERCOOLANT (AF- NAC) has tifreeze and cooling propertiesand can be used co ntinuously for 2 years or 40 00 hours. recommend the use of any coolant other than SUP ERCOOLANT (AF-NAC). I f you use ause serious problems, such as corrosion of the engine and aluminum parts of the ways observe the precautions given in the Operation and Maintenance Manual. with distilled water, so it is not flammable. COOLANT differs according to the ambient temperature.

of the COOLANT, see "CLEAN INSIDE OF COOLING SYSTEM (PAGE 4-24)". When using antifreeze, al ways observe the precautions given in the Opera tion and Maintenance Man Coolant is already diluted with distilled water, so it is not flammable. The density used for the COOLANT differs according to the ambient tempe For details of the density Even in the areas where it of over 30% in order to pr COOLANT is diluted with dilute the COOLANT with of the COOLANT, see "CLEAN INSIDE OF COO LING SYSTEM (PAGE 4-2 is not considered necessary to prevent freezing, a lways use COOLANT with a density event corrosion of the cooling system.

distilled water that does not contain any ions or water-hardening substances. Never ordinary water. ait for the engine to cool before adding coolant. If the engine overheats, w If the coolant level is low, i t will cause overheating, and will also cause proble ms with corrosion due to ai r entering the coolant.