. MAINTENANCE STANDARD TIGHTENING TORQUES FOR BOLTS AND NUTS STANDARD TIGHTENING TORQUES FOR BOLTS AND NUTS TORQUE LIST CAUTION lbft 8.7 to 10.8 20.3 to 25.3 43.4 to 54.2 72.3 to 90.4 112.1 to 141.0 170.0 to 213.4 238.7 to 296.6 336.3 to 419.5 452.1 to 564.2 578.6 to 723.3 853.5 to 1063.3 1121.1 to 1410.4 1446.6 to 1808.3 1808.3 to 2242.2 2133.7 to 2676.2 Apply the following table for Hydraulic Hose. 4 - 15 If nuts, bolts, o r other parts ar e not tightened to the specified torque, i t wil l cause looseness or dam age to the tightened part s, and this will cause failure of the m achine or problems with operation.
Always pay careful a ttention when tightening part Unless otherwise s pecifie d, tighten the metri c nuts and bolts to t he torque shown in th e table below. If it is n ecessary to replace any nut o r bolt, always use a Komatsu genuine part of the sa me size as the part tha t was replaced. Thread diameter of bolt (a)(mm) Width across flats (b)(mm) kgm lbf t Nm kgm 6 8 10 12 14 10 13 17 19 22 13.2 31 66 113 172 1.35 3.2 6.7 11.5 17.5 9. 23. 48. 83.
126 8 11.8 to 14.7 1 27 to 34 5 59 to 74 2 98 to 123 .6 153 to 190 1.2 to 1.5 2.8 to 3.5 6.0 to 7.5 10.0 to 12.5 15.5 to 19.5 16 18 20 22 24 24 27 30 32 36 260 360 510 688 883 26.5 37.0 52.3 70.3 90.0 191 267 378 508 651 .7 235 to 285 .6 320 to 400 .3 455 to 565 .5 610 to 765 .0 785 to 980 23.5 to 29.5 33.0 to 41.0 46.5 to 58.0 62.5 to 78.0 80.0 to 100.0 27 30 33 36 39 41 46 50 55 60 1295 1720 2210 2750 3280 132.5 175.0 225.0 280.0 335.0 958 126 162 202 242 .4 1150 to 1440 5.8 1520 to 1910 7.4 1960 to 2450 5.2 2450 to 3040 3.1 2890 to 3630 118.0 to 147.0 155.0 to 195.0 200.0 to 250.0 250.0 to 310.0 295.0 to 370.0 Nominal- No.
of threads (a) Width across flats (b) mm Tightening torque Target valve Parmissible range Nm k gm lbft Nm kgm lbft 9/16 to 18UNF 19 44 4.5 32.5 34 to 54 3.5 to 5.5 25.3 to 39.8 11/16 to 16UN 22 74 7.5 54.2 54 to 93 5.5 to 9.5 39.8 to 68.7 13/16 to 16UN 27 103 1 0.5 75.9 84 to 132 8.5 to 13.5 61.5 to 97.6 1 to 14UNS 32 157 1 6.0 115.7 128 to 186 13.0 to 19.0 94.0 to 137.4 · 13/16 to 12UN 36 216 2 2.0 159.1 177 to 245 18.0 to 25.0 130.2 to 180.8