Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE MAINTENANCE SERVICE PROCEDURE WHEN LOOSENING TENSION WARNING the procedure given below. If the track tension is not 4 - 28 4. Continu tension is still loose, the pi s ar e excessively worn, so they must be eithe r turned or r eplaced. Contact your Komats It is extremel by ethod exc relieved by th is procedure, contact your Komats u distribut 1. Loosen plug (1 ) gradually to release the grease. turn. 2. When lo osenin g plug (1), tu rn it a maximum of 1 turn 3. If t he gr ease d oes not come out smoothly, move the machine forward s and b ackwards a 4. Tighten plug (1 5.

To chec k that t he correct ten sion has been a chieved, move the machine backwards and for wards. 6. Check t he trac k tension aga in, and if the tension is no t correct, adjust it again. NOTICE The safety label i s stuck on the back of cover (3), so b e careful n ot to damage th e safet y label. eful not to let any dirt or soil get in. Whe n removing c over (3), be car eful not to let any dirt o r soil get i