. MAINTENANCE SERVICE PROCEDURE 5. Turn starting switch (1) to START position and start the engine. The cooling fan will rotate in the reverse direction. REMARK CLEANING WITH COMPRESSED AIR WARNING of or 4 - 33 6. Run the engine Select the time for running the en gine at high idle as follow s accordi ng to the conditi on of clogging Normal clogging : 1 to 2 minutes Excessive clogg ing: 2 to 3 minute 7. After completin g the cleaning, run the engine at low idle for approximately 10 second 8. Turn starting sw itch (1) to OFF p osition and st op the engin 9.
Close the right and left engine sid If dirt is caught in th e radiator fins, blo w with comp ressed air to Directing compress ed air, pressurized water, or steam directly at yo ur body, or using these and c ausing dust to f ly m ay c ause personal injury. Al ways wear protectiv e glasses, ant i-dust mask, an d other p rotective equipmen t. When carrying out cleaning, always st op the engine and check tha t the fan is not rotating. If you touch the f an when it is rotating, it will caus e serious personal injury. CLEANING OF RADIATOR FINS AND AFTER-COOLER F INS 1. 2. 1. Remove bolts (1 ) at the 4 corners of the radiato r grill, then op radiator grill (2). 2.
Clean the radiat or fins clogged wi th mud, dust and leaves w compressed air . Steam or water may be used instead . compressed air REMARK Check the hydraul ic cooler hoses. If any hose is cracked Check hardened by age, re place with a new hose. Also ch eck and tight al l loose hose clam ps.