Komatsu — WHEN REQUIRED

. MAINTENANCE SERVICE PROCEDURE 4 - 35 CLEAN HYDRAULIC TANK BREATHER (1) 1. Remove nut (2 ) of breathe hydraulic tank, t hen remove cover (3) 2. Remove dirt stuck to clean ligh t oil or detergent o 3. Install cover (3) an d nut (2). Tightening torque: 10 to 14 Nm { 1.0 to 1.4 kgm, 7.2 to 10.1 lbft} the top of the (4) an CLEAN FUEL TANK BREATHE R 1. 2. 3. 1. Remove nut (2) of breather assembly (1) at the top surfac e of the fuel t ank, then r emove c ove r (3). Remove clean ligh dirt t oil Install cover (3) and nut (2). Tightening torque: 10 to 14 Nm { 1.0 to 1.4 kgm, 7.2 to 10.1 lbft}