Komatsu — EVERY 250 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE WHEN IT IS POSSIBLE TO USE INDICATOR TO CHECK ELECTROLYTE LEVEL 4 - 61 WHEN IT IS IMPOSSIBLE TO CHECK ELECTROLYTE LEVEL FROM SIDE OF BATTERY If it is impossible to check the elect rolyte level from the side of the battery, or there is no displ ay of UPPER LEVEL line on the side of the battery, che 1. Open the battery cover on the 2. Remove vinyl sheet (1) installe 3. Remove cap (2) at the top of t he battery, look through water filler port (3), and check th electrolyte dose not reach the (example: commercially availab reaches the bottom of sleeve (4 (A) Suitable level: Electrolyt so surfac surface to (B) Low:

Electrolyte level is poles appear straig filler port (3), and check th electrolyte dose not reach the e electrolyte surface. If the sleeve (4), add distilled water (example: commercially availab le battery refill) so that the level reaches the bottom of sleeve (4 ) (Max. level: UPPER LEVEL). e level is up to bottom of sleeve, e tension causes electrolyte bulge and poles appear bent. (B) Low: Electrolyte level is not up to bottom of sleeve, so ht and not bent. hten cap (2) securely. 4. After adding distilled water, tig REMARK If water is added to above the botto m tip of the sleeve, use a pipette to remove electrolyte.

Neutralize sodium bicarbonate, then flush it the removed electrolyte with away with a large amount of r Komatsu distributor or your water. If necessary, contact you battery maker. If it is possible to use an indicator t o check the electrolyte level, follow the instructions given.