Komatsu — EVERY 1000 HOURS SERVICE

. MAINTENANCE SERVICE PROCEDURE REPLACE FUEL MAIN FILTER CARTRIDGE Carry out this operation after carrying out the maintenance in the "REPLACE FUEL PREFILTER CARTRIDGE (PAGE 4-68)" for every 500 hours. WARNING Prepare a filter wrench and a container to catch the fuel. 1. Open the inspection cover at the bottom of the fuel tank. 2. Turn fuel tank valve (1) to CLOSE position (C). 3. Open up the engine side cover on the left side of the machine. 4. Remove bolts (2) - 2 bolts in total- to remove lower side cover (3).

4 - 71 EVERY 1000 HOURS SE Maintenance for every 50, 25 0 and 500 hours should be carried out at the sam After the engine has been oper ated, all parts are at high temperature, so do not replace the filter immediately. Wait for all parts to cool down before starting t he operation. side the engine fuel piping system when the engine is running. High pressure is generated in side the engine fuel piping system when the engine is ru When replacing the filter, wait for at least 30 seconds after stopping the engine to le t the internal pressure go down before replacing the filter. close.

Do not bring any fire or flame NOTICE Genuine Komatsu fuel filter c artridges use a special filter that has highly efficient filt ering ability. When rep lacing the filter cartridge, always use a genuin e Komatsu part. The common rail fuel injection system used on this machine consists of more precis e parts than the conve ntional injection pump and nozzle. If any part other than a genuin e Komatsu filter cartridge is used, dust or dirt may get in and cause problems w ith the injection system. Always avoid using s ubstitute parts. When carrying out inspection or maintenance of the fuel system, pay more attention t han normal to the entry of dirt.

If dirt is stuck to any part, use fuel to w ash it off completely.