. OPERATION EXPLANATION OF COMPONENTS (A) to (B): Red range (A) to (C): Green range (C) to (D): White range POWER TRAIN OIL TEMPERATURE GAUGE during operations. HYDRAULIC OIL TEMPERATURE GAUGE the 3 - 18 MULTI-GAUGE This gauge (6) displays a vari ety of items, but the following explanation describes the actuation for the p ower t rain oil te mperature gauge and hy draulic oil temperature gauge. s. The indicator should be in the green range during operation If the indicator enters the red ra nge (A) during operation,it me ans tha t the oil temperature is too high.
If thi s happens, turn the fuel control dial down to approximately 3/4 of the maximum speed, reduce the load, and wait for the oil green range. maximu temperature to go down to the If the indicator enters the red range (A) during operations an d the alarm buzz er sound s, run the engine at low idle and wait for the oil temperatur e to go down. The overheat prevention syst em is actuated as follows. r train oil temperature monitor (E) or hydraulic oil temperature monitor (F) shows mality display Red range (A) position: Powe abnor Red range (B) position: Engin e output lowers and speed ran ge is f ixed t o 1st.
Power t rain oil temperature monitor (E) or sound hydraulic oil temperature monitor (F) shows abnormality display. Alarm buzzer s at same time hows abnorm buzzer NOTI CE engine output is limited by the overheat prevention system, stop working until the oil temperature lowers. If the engine output is limited by t he overheat prevention system, s top working u ntil th e oil temp After confirm that the abnormality display has gone OFF, stop the m achine before starti ng work. A t this time, be sure to l owe r the engi ne output with the fuel contro l dial or decelerator pedal. reset.
Limitation of the engine output is NOTI If the power train oil temperature gauge tends to enter red range (A down NOTI Whe hydraulic oil temperature has exc eeded 102° C. Then run the engine idle o r stop it and wait for the oil t