Deutz — Removing and installing the fuel injectors

D 2011 w Fuel system TD 2011 w, TCD 2011 w W 07-07-01 Removing and installing the fuel injectors Commercial available tools: – Assembly pliers. . . . . . . . . . . . . . . . 8024 W 07-03-01 – W07-07-02 Special tools: – Puller. . . . . . . . . . . . . . . . . . . . . . 110090 – Slide hammer . . . . . . . . . . . . . . . 150800 – Plugs/caps . . . . . . . . . . . . . . . . . 170160 Danger! Wait 30 seconds after switching off the engine before working on the fuel system. Attention! Pay attention to utmost cleanliness when working on the fuel system. Remove residue paint and particles of dirt before removing. Clean the respective affected parts care- fully.

Blow damp areas dry with compres- sed air. Observe the safety regulations and natio- nal specifications for handling fuels. Close all connections immediately after opening with new, clean plugs/caps. Do not remove plugs/caps until immedia- tely before assembling. Collect leaking operating substances in suitable vessels and dispose of according to regulations. After all work on the fuel system, it must be bleeded - see the operation manual, chap- ter "6 Fuel system“. 6 Removing fuel injector z Remove injection lines. W 07-03-01 © 47557-0 © 12/2008 19502-001 1/6