D 2011 w Technical data TD 2011 w, TCD 2011 w Tightening specifications 4 © 12/2008 19484-001 5/6 ID no. Name Screw type Notes / Remark Value A09 010 Coolant pump on thermostat housing M8x35-10.9 M8x100-10.9 20 Nm A09 020 Pipe clip on holder M6x16 21 Nm A09 031 Temperature transmitter on thermo- stat housing 25 Nm A09 042 Ventilator on flange hub M8x40-10.9 30 Nm A09 045 Air bearing on console M10x110-12.9 Stage 1: Use new screw. 30 Nm A09 045 Air bearing on console M10x110-12.9 Stage 2: 120° A12 001 Flywheel on crankshaft Stage 1: Use new screws 30 Nm A12 001 Flywheel on crankshaft Stage 2: 60° A12 001 Flywheel on crankshaft Stage 3:
30° A12 031 V belt pulley/flange hub on output flange M10x30-8.8 43 Nm A12 041 V-belt tensioning pulley (holder) on front cover 45 Nm A12 051 Hydraulic pump on hydraulic pump console 57 Nm A12 052 Tensioning pulley on hydraulic pump console 21 Nm A12 056 Protective hood on hydraulic pump console 8.5 Nm A13 001 Starter on crankcase 43.5 Nm A13 009 Shield on crankcase M6x14-8.8 8.5 Nm A13 012 Generator on console M8x70-10.9 M8x75-10.9 34 Nm A13 015 Clamping bracket on generator M8x30-8.8 22 Nm A13 016 Clamping bracket on console M8x35-8.8 22 Nm A13 031 Glow plug in charge air line / intake pipe 60 Nm A13 032 Heating plug on cylinder head 21 Nm A13 034 Cable connection to glow plug 4 Nm A13 081 Charging current cable to generator B+ 6.5 Nm A13 082 Cable G1.D+ to generator M5 3.5 Nm D 2011 w A06 030 Air suction intake pipe on cylinder head Torx screw, coated Use new screws.
21 Nm A06 057 Pipe to exhaust gas return valve/ cylinder head (cooling - intake) Hollow screw M12x1.5 29 Nm A06 062 Exhaust return pipe to exhaust return valve M8x65-10.9 20 Nm A06 063 Exhaust gas collection pipe to exhaust gas return valve 20 Nm A06 071 Pipe to crankcase (exhaust gas return - cooling - return) Hollow screw M8x1 12 Nm A06 072 Pipe to exhaust gas return valve (exhaust gas return - cooling - return) Hollow screw M12x1.5 29 Nm